600 Set/Sets per Week Semi-automatic Cup Sealing Machine
Packaging & Delivery
Shipped in 15-25 after payment
manual cup sealing machine,semi-automatic plastic cup sealer for milk tea/juicer/bubble tea
Basic parameters of products
Semi-automatic Cup Sealing Machine
Suitable cup size:
THE USE OF METHODS
1.mounting adhesive film (a)to get hte film required to comfirm the film winding direction,find the counter-clockwise direction,and the circular clamp peate clamped on the film is fixed on the shaft.(in the film please power off) (b)pay attention to film before and after fixation splint and whether film closely,such as the inability to close combination,by the knife adhesive film paper tube inner bevel again in. (c)install rubber membrane with fabric glue film firmly affixed to the receiving paper tube.
2.sealing operation steps (panel loperating instructions) (a).the power supply is switched on,turn on the power switch,indicator light,the temperature is set to a predetermined temperature, The green heating indicator light.When the heating plate reaches a predetermined temperature,temperature of red Indicator lights (sealing machine at work, the electric heating device in the heating and insulation state continuously make .Instead ,the green and red lights are also constantly alternate display, which is a normal phenomenon). (b)Put the cup into the slip board,with the hand will lower die slide into the determined position,downward pressure.Dynamic sealing machine handle to the maximum stroke maintain 1~2 seconds,then slowly raised hands .Handle ,and pushed to the original position. (c)Pull the slip board ,takes out the rubber cup,add without sealing rubber cup,another cycle. (d),a cup of counting function:the power switch is open. Handle each pressure sealing cup once, meter. Lou is a cont.
MATTERS MEEDING ATTENTION 1. grounded, to ensure safe use of electricity. 2. machine failure, you should turn off the power first, recovery after normothermic and troubleshooting. 3the use of process shall handle extending between upper and lower molds, so as to avoid barotraumas or scald. 4.the upper and lower mold must be aligned only after thorough pressure hand tool handle. 5.handle when under pressure, not too hard. 6.working voltage must be maintained at 220V
Delivery: Shipped in 20-35 after payment ( it’s better to ask us before place order,because we need to arrange the produce time.)
Payment:Western Union, T/T(30% deposit and 70% before shipment)
Q1.What Does Your MOQ Mean?
MOQ means different products have different minimal order quantity in a certain range.
We are a factory and generally do wholesales.However, trial order is also acceptable and welcome!
Q2.What Methods of Payment Are Acceptable?
1. Telegraphic Transfer (T/T): we accept 30% T/T deposit before production and 70% T/T Balance before shipment. 100% payment for sample orders.
2. Western Union: we accept 100% payment via the western union.
Q3.What Is the Cost of Shipping?
Shipping cost is based on the following elements:
Number of packages
Q4.How About the Delivery Time?
1.Some of the products are in stock at our warehouse, generally we need 3~5 days to change the plugs before the delivery.
2.Regarding to the non-stock products, the lead time 15-25 working days on receipt of your down payment.Also depends on your requirement on the product.
Guangzhou Shuangchi Catering Equipment Co.,LTD,is located in Huadu Guangzhou,which enjoying the reputation of 'Chinese Catering Equipment Capital'.Our factory covers an area of more than 10000 square meters with superior location.Adjacent to the Guangzhou Baiyun International Airport.The company has a vibrant and dynamic,experienced R&D,design,production,sales in one of the team.At the same time,we won our clients favor and support.We always insist in the spirit of a people-centered design concept,equisite processing technology,has introduced BBQ grill,Soybean Milk Machine,Cotton Candy Machine,Ice Crusher,West snacks equipment and other series.